Dual Axis Tracker

O&M Comparison on Fixed Tilt vs. Single Axis

O&M Comparison on Fixed Tilt vs. Single Axis

O&M Comparison on Fixed Tilt vs. Single Axis

By Sun Action Trackers

In this short overview, we will be discussing the Operations and Maintenance cost difference between Single Axis Solar Trackers, and Fixed Tilt Solar Array Solutions.  First and foremost, there is not a defined answer to many of the questions surrounding the upkeep time and costs since each system is different, just as each project site is different and so on.  Rather than take a generalized position on these topics, Sun Action Trackers understands that each and every single axis tracker solution that is installed is absolutely unique in and of itself.  In many situations, single axis solar trackers will be the solution that will best fit the project, while dual axis solar trackers may be of better use in other scenarios.  Let’s take a look at some of the hard-pressing questions that surround this area of conversation.

We were recently working with a Developer that asked if the increased O&M costs on a single axis solar tracker were offset by the performance of the array.  In this particular deployment, the answer was yes, making the additional cost justified.  There are a number of factors that are in play in any development project that need to be noted as well.  Some of these factors are:

  • Geography and Topography – Site design
  • Location – level of irradiant light, snow, etc.
  • PPA – How much are they receiving per KWh, MWh, etc.
  • Time Sensitive Matters – Current price of Steel, Copper, and other commodities

In this Developer’s case, it made sound financial sense to opt for the single axis solar tracker system rather than fixed tilt due to the increase in productivity vs. cost to operate and maintain the system.  This then raised another major question being discussed industry wide at this point.  Centralized or Decentralized Movement Systems?  This refers to whether or not each row is joined by linkage or whether each row moves independently of one another.

There are two major sides to this part of the conversation, which are both significant.  Sun Action Trackers offers a linked row system in our PST-1AX6 single axis solar trackers.  This eliminates a large percentage of moving and electro-mechanical parts in comparison to “decentralized” system designs.  By lowering the moving parts, it creates a more stable and efficient system.  This is achieved by linking 6 rows to a single link rod that pushes all 6 rows in unison.  That means 1 actuator motor can run 324 solar panels to track the sun simultaneously.  In comparison, decentralized systems use multiple sets of sensors, separate control boxes and multiple motors which create exponential opportunity for failure.  These “decentralized” systems could also take as many as 4 times the slew or actuators drive motors, sensors and control boxes, to achieve the same output as its centralized counterpart.  As you can imagine, the centralized single axis solar tracker solution offers greater dependability due to less electro-mechanical parts, leading to less potential for breakdown.  With less electro-mechanical parts and motors, centralized single axis trackers will also be easier to find pieces and parts for moving forward since they are built out of mostly existing parts, as compared to some decentralized solutions that offer complex circuitry multiplied by the number of rows installed.   Over time, this will also drive the O&M costs down as the solar industry continues to grow in adoption rates, and investors are more comfortable with this cutting-edge technology.  Innovation will also play a major role as single axis solar tracker systems become even more efficient and streamlined.

With all of that being said, we believe in the application of the KISS METHOD when it comes to single axis solar trackers.  KEEP IT SIMPLE SOLAR.  Less means more.

Posted by Jonathan Bunting in Actuator, component, Dual Axis Tracker, Products, real time sensor, Residential Solar Trackers, slew drive, solar system benefits, solar tracking, 0 comments
Scot Arey Interview – Dual Axis Residential Trackers

Scot Arey Interview – Dual Axis Residential Trackers

Scot Arey Interview - Dual Axis Residential Trackers

By Sun Action Trackers

We sat down with Scot Arey from Solar Cen Tex for a casual discussion about our Dual Axis Trackers in a residential installation.  Scot has installed more than a few of our trackers, and we thank him for his insight and perspective.

 

Posted by Jonathan Bunting in Community, Dual Axis Tracker, Products, Residential Solar Trackers, solar tracking, 0 comments
Dual Axis Residential Tracker Dealer Profile : Howard “Scot” Arey – Solar CenTex

Dual Axis Residential Tracker Dealer Profile : Howard “Scot” Arey – Solar CenTex

Dual Axis Residential Tracker Dealer Profile : Howard "Scot" Arey - Solar CenTex

By Sun Action Trackers

Sun Action Trackers would like to welcome Solar CenTex to our list of Authorized Dual Axis Residential Solar Trackers Dealer Network.  Howard “Scot” Arey, President and founder of Solar CenTex, has been an advocate for Solar Energy collection in Texas for many years, as he resided as a Chair on the Board of Directors of the Texas Solar Energy Society, and as Executive Vice President at Nexolon America, after 25 years of service in the United States Army, eventually retiring as a Colonel in 2013.  Scot has installed more than a few Dual Axis Solar Trackers from Sun Action Trackers and continues to adopt and champion our mission to increase solar output through engineering and innovation.

“The first time I saw this technology was at Solar Power International two years ago, and visually it was stunning.  In the case of SPI, it was even a moving display and when people see it, it is impressive.   In Texas we have a lot of ranches and a lot of space, and I always tell folks, this is the coolest way to have solar, but more importantly from our end, it is easy to recognize that this is the most value and effective way to put solar in.”

Solar CenTex has installed over a dozen of the Dual Axis Solar Trackers in various places in and around Waco and San Angelo Texas, on ranches and larger properties in the area.  During a particular installation, he was also able to run two separate interconnection points off of the same Dual Axis Solar Tracker.  He also plans to run a battery system to create the first “off-grid” or “microgrid” scenario for a Dual Axis Solar Tracker in the residential space.  When asked “Why Sun Action Trackers?”  He replied:

“It just makes so much sense.  If you don’t have such a great solar resource as we have here in Texas, solar production really matters, and you have to do whatever you can to maximize production yield.  The team as Sun Action Trackers is committed to a great product, and support, and they want you to be very successful.”

We would like to thank Scot and the whole team at Solar CenTex for believing in our solution as much as we do.  If you would like to know more information about Solar CenTex please click HERE, and if you would like to know more about our Dual Axis Solar Tracker solution for residential use, please feel free to CLICK HERE for more information.

Posted by Jonathan Bunting in Community, Dual Axis Tracker, home news, real time sensor, Residential Solar Trackers, solar tracking, 0 comments